Studio Entry Bench and Coat Rack

You don’t need me to tell you today was freezing cold outside. I awoke early to take the car in to get the inside cleaned…detailed I guess is the fancy term. See, we noticed mouse droppings in the RAV4 the other day and that’s all it took for us to decide to hire a professional. The car was filthy and the guys at Wheely Clean did a great job restoring it to like new condition.  With all the cold I guess the mice had enough of living in the cold garage and ventured into friendly confines, replete with old french fries under the seats and a half drunk juice box in the door.  I pray that they are gone now though.

Anyway, it was a pain getting up and going outside in -8 degree weather.  There, that’s my complaint for today. Otherwise it was a decent day. Got to spend some time working on a new home dec design project for my brother. If you ever need a cabinet-maker, he’s the guy to call. I’ve been fortunate to work alongside him on a few projects at our house and we even wrapped up a fireplace surround at a friend’s house. I’m even learning a few tricks of the trade which is always good.

Speaking of projects around our place, I wrapped up a fun, quick project in the studio.  I installed the coat hooks, reinstalled the switch and out plate plates and put hinges on the bench. Now we can enter the house on frozen days like today, through my studio and kick off wet boots and hang up heavy winter coats, and avoid trashing the front hall entry. Remember, you always want to try to have just one entry to your house for various reasons, but if you have two make sure they’re delightful or at least there’s a good reason. I like the studio entry for the above reasons. The cement floor and abundant space in the studio means we can shed snow laden clothing and let it drip dry with no worries or fuss.

It took me three tries before I found coat hooks I liked.  I went to, and bought hooks from, Hartville Hardware, Home Depot and Lowe’s before I found the perfect ones.

Here are the three styles I bought:

Third time is the charm. Here are the three styles of coat hooks I bought.

Third time is the charm. Here are the three styles of coat hooks I bought.

I like the one’s I ended up using (far left in the photo) because they match the drawer pulls and look contemporary and old-fashioned at the same time. Below the hooks we have an entry bench. The bench is designed, by yours truly, to fold up so that the second entry door can be opened up all the way. I attached two oil rubbed bronze door hinges to the bench and a drop down latch to retain the bench panel in the raised position. I kept everything quick and easy by simply surface mounting the hinges and latch. I could have over thought it but for once I decided just do the simplest, easiest thing and that’s what I did. Everything functions and looks great. It all adds a bit of rustic charm and detail to my studio space.  I like it very much.

Here are the coat hooks I went with, Gate House hooks from Lowe's in oil rubbed bronze.

Here are the coat hooks I went with, Gate House hooks from Lowe’s in oil rubbed bronze.

Here is a bench hinge installed, I just surface mounted the hinge. It looks and works fine.

Here is a bench hinge installed, I just surface mounted the hinge. It looks and works fine.

Image of the finished studio entrance bench and coat hooks.

Image of the finished studio entrance bench and coat hooks.

This latch holds up the bench when I need to open both doors.

This latch holds up the bench when I need to open both doors.

latch in the "holding" position.

latch in the “holding” position.

Here you can see the bench in the "up" position. On another note, I wish we didn't have a vent in the floor right below the bench. Takes up shoe space.

Here you can see the bench in the “up” position. On another note, I wish we didn’t have a vent in the floor right below the bench. Takes up shoe space.

Hardware for the hinge included one really long screw. I'm not sure why but I used it in the top center hole to fasten the hinge to the back wall of the bench area.

Hardware for the hinge included one really long screw. I’m not sure why but I used it in the top center hole to fasten the hinge to the back wall of the bench area.

One other fun thing today, Christine made me a Scrapimal (TM) of Dixon for above my studio sink. I love it; and I hung it up already.  To help pay for all these projects of mine, you should check out her Etsy store and buy yourself, or a loved one, an original Scrapimal (TM) as well. They’ll make your day as they did mine.

Dixon is a Scrapimal!  Weee!

Dixon is a Scrapimal! Weee!

One bit of housekeeping, I went ahead and purchased http://www.nineappletrees.com for eighteen bucks so from now on that’s where you’ll find the blog. The old address should redirect there anyway, but just in case. That makes the blog a little more official (and I think more appealing to advertisers….not that’s why we do it but hey, if I can someday earn a penny that’d be good….homeless home projects would be much less compelling I suspect.)

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s