Round three of me working to preserve my gravel driveway. Last year and this winter have been rough on the driveway. A couple years ago I spread out a few tons of 411 limestone. Then last year I had Driveway Dave bring in a few tons and tamp them down where the pot holes are at. At the time Dave said I need to ditch around the perimeter, to route water under the drive. Possibly add a second pipe under the driveway. The surface water is creating and preserving the pot holes. Adding more gravel isn’t doing much.
In a perfect world I’d hire an excavating company to come out and fix the drive. Or in a slightly less perfect world I’d rent one of those kickass little baby excavators and dig my ditches using that. But here in the real world where I live month to month, I’m digging my ditches by hand. And I’ll have five tons of 411 delivered in two weeks (cost about $150-$300 delivered).
It’s really tough to gauge the fall of the land but from far away it looks like if I dig one continuous ditch along the south side it’ll route all the surface water to my one pipe, and under the driveway.
The ground is super wet due to a huge rain storm we had yesterday, so I decided to start digging and see how it would go. It went pretty good. I figured out to dig with the ditch, at one end of it, as opposed to against it or standing to the side. There’s a lot of thick grass and the ground is oversaturated so it was slow going, back breaking work. But the water is flowing along the ditch so that’s encouraging.
Ultimately my goal is to have a nice two track driveway devoid of potholes. We’ll see how well my ditches work once I finish them and it rains again. Maybe I finally found my calling in life.