Christmas Tree Day 2015

It’s Saturday early evening, I’m sitting down with a beer and listening to Christmas music. For the next half hour or so I will have the equivalent of a day to myself, to relax and write.

In the spirit of the season, we went out and bought our Christmas tree today. It’s a live Norway spruce tree, or at least that’s what we think it is. They weren’t labeled at the tree farm. As is our tradition, we get the tree a few weeks before the holiday, then bring it inside a few days before Christmas and decorate it. After the holiday we plant the live tree in a pre-dug hole somewhere out in the yard. This year the tree will go out on the pond dike. Previous year’s trees can be seen just off the driveway. Once a tree graduates from home to yard, the following year it gets a string of colorful solar lights. The idea being that, let’s say we’re here twenty years. Visitors would be able to see twenty trees in the yard with colored lights on them. Fun.

Back inside the house, I’ve been slowly continuing work on the basement. I’ve started tiling my office area, and I have also essentially finished the full bathroom.  Tiling is going slow, but I think I’m doing an okay job. I got a new tile cutter at Lowe’s and I’m very happy with its performance. I haven’t really ruined any tiles yet. I think it’s got a good sharp wheel and easier action, and that makes a difference. I do need a grinder though to angle cut some tiles around a doorway. But there’s no reason to spend $80 on a tool I probably won’t ever use again. I’m going to see if I can make a Dremel tool work or, worst case, rent a grinder.

In the bathroom, all of the accessories are hung. It took me a while to figure out where the blocking was for the towel bar. In the process of discovery I drilled about a half dozen holes in the drywall, all of which I had to patch up and repaint before mounting the bar.

While figuring out where to hang up the toilet paper roll holder, I discovered that you’re supposed to mount it about 8″ in front of the toilet bowl, off to the side. Well I don’t have a wall in that location. I could have mounted the holder on the adjacent cabinet, but the wife and I both voted against that. So, behind and to the side of toilet the holder went. I think it’s fine. I don’t see how just putting the roll in a basket or a freestanding holder does anything. It’s fine back there.

As time allows I’ll continue to tile. I want to make sure I get all the tile down as soon as possible, in case they discontinue the tile style. I don’t want to be left short of tile. Then I’ll really be in trouble.

Earlier today I extracted honey from hive No. 3. As I may have mentioned in a previous post, this hive died late this autumn. We got nine frames of honey. I haven’t weighed it yet.

Next year we’re just going to manage one hive. If it gets large enough we can split it. Otherwise, we’re not pouring any more money into beekeeping if we can help it.

Actually we’re not going to pour any money into any projects for the foreseeable future. I’ve got the materials to finish the basement, except the ceiling. That should keep me busy DIY-wise for a while.

One interesting side note, I’m finally selling my trusty Rabbit. The wonderful VW that kept me company throughout our new home build, and was mentioned in many a post, well it’s time to say goodbye. We need more space and more doors in a vehicle. If you know anyone who’s looking for a great, clean car for commuting, running errands, or just starting out, let me know. I’ll make you a great deal on our good friend.

Ok, here’s today’s pictures. Time for me to go back to the real world and all of its responsibility. Cheers!

 

 

Advertisements

Summer Honey

I spent the weekend extracting summer honey. This is the first year we’ve extracted honey two times. The amazing thing is how dark this honey is compared to the lighter spring honey we extracted in July. I’m not exactly sure why it is so much darker, other than I know that the nectar that the bees collect determines the color. That is to say, different flowers produce different color honey. Our land has a variety of flowering trees, bushes and plants that blossom throughout the year, so I suppose it’s not too surprising that summer honey differs from spring honey. But I’ve never seen it this dark before. It’s basically black for all intents and purposes.

(Here is a good article from ErinNudi.com on the benefits of dark honey.)

Basically darker honey has more vitamins, anti-oxidents, and nutrients than light honey. Dark honey is preferred in Europe, and light in America. Dark is better with your oatmeal, whereas light is better with your tea.

Like wine I suppose, honey has a variety of flavor profiles, and there are even honey tasting events. We did our own impromptu honey tasting, and they do smell and taste different. You could definitely smell the difference while I was extracting the honey, as the dark honey has a stronger smell than light. We bottle our honey similar to wine, in that I mark the season, year, type and hive number or numbers on each bottle. Honey never spoils, so we plan on saving at least a bottle or two from every extraction we do, so we’ll have a “library” or catalog of our honey throughout our lives as beekeepers.

We pulled three frames from Hive No. 3, and eleven frames from Hive No. 1, for a total of 14 frames in this batch. I combined them all into one “vintage”. Right now I’m naming the honey ‘3/11 Summer 2015 Wildflower’, but it’s so dark and we’re close to Halloween, I may name it something different. The “3/11” part indicates the number of frames in this “blend”. It’s not always going to be convenient to separate extractions by hive, in which case we’ll have blended varieties.

Hive No. 1 is a real overachiever this year. A typical new hive won’t usually produce any harvestable honey its first year. Hive No. 1, the angry bee hive, has given us over 85 lbs. of honey in year one. And it still has plenty for itself over winter; nearly an entire mid sized super or more.

One last note before we get to the totals and pics. The yellow jackets are out in full force again this fall. We’ve been filling traps with them, and we’ve put our entrance reducers on both hives. A smaller entrance is easier to defend. And we’ve dropped both lids flat to keep the yellow jackets out of the top of the hive as well. When I was cleaning the equipment today, there were a lot of yellow jackets out. We were killing them one at a time when possible. So fingers crossed that both hives survive until the first frosts show up and the yellow jackets die off.

Totals – Summer 2015 3/11 Wildflower honey

Frames: 14 (3 hive 3, 11 hive 1)

47 pounds of honey

(2) 4 oz. jars

(56) 8 oz. jars

(5) 16 oz. jars

Honey Bee Update

Inspecting hive No. 3 in August 2015.

Inspecting hive No. 3 in August 2015.

As promised, though a little late, the third of my posts updating you on what’s been going on. You may, or may not, remember that in June we were attacked by hive No. 1. Since then a lot has happened so let me get you back up to speed.

After hive No. 1 attacked, resulting in 17 stings for me and over 25 stings for my wife we let the hive cool off for a day. Only for me to go out to deposit some compost in the compost pile and get stung on top of my head. The subsequent day I was stung on my ankle and on my lower eyelid, both while cutting the grass.

Enough was enough. We called a couple of bee keeping friends to come out and look at the hive. The plan was to find the queen and step on her. Then we could re-queen the hive with some new, less angry, genetics.

All three ladies, two friends and my wife, went out to the hive to find the queen. The big tough guy in the group, me, waited by the compost pile in my bee suit. I had a smoker too, just in case things got crazy. I liked to think I was the support guy who could run screaming for help in case things went awry.

They took the hive apart, swarmed by 60,000 angry bees.

I stood thirty yards away being repeatedly attacked by two very angry bees.

Turns out they found the queen, were going to capture her in lieu of squashing, but then lost her again when someone went to retrieve a queen “cage” from a car. So they installed queen excluders between the three major sections of the hive; the plan being that next time we checked the hive we could quickly figure out which hive section she was in, then we could squish her.

The feedback from our friends was that our hive was aggressive, but not quite as angry as the hives they had been splitting earlier in the day, elsewhere.

The ladies inspect hive No. 1

The ladies inspect hive No. 1

We did check the bees again in a week or two. The queen excluder trick worked, we figured out which box she was in. I’m not sure if we saw her, but the bees didn’t attack us that much. That coupled with the fact that they produced a huge quantity of honey earned her a pardon.

The hive was just too strong, and performed too well to kill her off.

We would just have to endure their eagerness to kill us.

‘Cause honey.

You know.

Hive No. 3 had been doing well meanwhile. Then at some point they lost a queen and we thought they didn’t re-queen themselves. So we actually bought a new queen since the hive was devoid of capped brood (baby bees in cells waiting to hatch). Turns out we might have had a virgin queen because the last two times we inspected the hive, we saw a queen that was not the one we bought. (The one we bought was marked).

Here, you can see the "Virgin Queen" of hive No. 3.

Here, you can see the “Virgin Queen” of hive No. 3.

Harvest wise we extracted honey from hive No. 3 in early July, and from hive No. 1 in late July. All the honey is considered Spring 2015 Wildflower, and label as such by hive number. Honey never spoils, so we will keep a jar or two from each harvest. Generally speaking we label all of our honey with the proper vintage information. Theoretically down the road you could collect a variety of vintages and compare the taste. Our plan is to start a journal and record our harvests. I’d also like to start charting the bloom schedule for each year.

I don’t have the information for hive No. 3 in front of me right now, but it was an average harvest. I think I extracted six (6) frames, and got about twenty-five (25) 8oz. jars of honey.

Angry hive No. 1’s production was off the charts, or at least our new beekeeping charts. On July 25th, 2015 I extracted 15 frames full of honey. Resulting in 50 lbs. of honey (nearly 4+ gallons). We filled fifty-four (54) 8oz jars, twenty-two (22) 4oz gift jars, and three (3) 16oz bulk mason jars. Retail for the honey we got from hives No. 1 & 3 is around $600+. Not a bad take for our bees, some of whom tried to murder us.

Honey flow after extracting hive No. 1 honey.

Honey flow after extracting hive No. 1 honey.

The summer 2015 haul of honey from hive No. 1. 15 frames. 54 8oz bottles, 22 4oz bottles, 3 mason jars. 50 lbs. of honey total.

The summer 2015 haul of honey from hive No. 1.
15 frames. 54 8oz bottles, 22 4oz bottles, 3 mason jars. 50 lbs. of honey total.

We’re keeping an eye on the supers. Hive No. 1 could potentially fill another in late summer and still have enough for their winter. So we could be extracting more in September. We’ll have a better idea next time we check. Hive No. 3, with their queen drama, probably is done for the year in terms of providing honey for us.

Right now golden rod is in full bloom, so there’s plenty of pollen to be had. The summer has been extremely dry though; not sure how that will affect things. Clover is pretty much done as are daisies. Cone flowers and black-eyed susans are still in bloom.

So there you have it. Your honey bee update for mid-August.

Basement drywall should start this week so stay tuned for updates on that as our basement is transformed. Should be exciting to see.

Bees

After a long art show weekend we finally found the time to check the bees again. We weren’t too far behind our normal two to three-week check up on our pollinating friends.

So far this year the two remaining hives we have, or I should say the one remaining and one new hive, have been seemingly doing well. Hive No. 1 has been growing and hive No. 3 has been the best performer this year.

We recently had an inspection by the county. It’s a voluntary program where by an inspector checks out your hives. They said hive No. 1 had a queen and hive No. 3 was building queen cells and had some mites. Nothing outside the normal for our hives. Nothing we were worried about. We treated for the mites, and we go through 1-2 queens a year it seems.

Today we opened up hive No. 3 and everything looked pretty good. We did not see eggs or a queen, but saw lots of bees being born, capped brood and a few queen cells. So theoretically if there’s no queen, they’re in the process of making one.

There were a ton of bees flying about, not too thrilled that we were checking them.

We did pull off about six frames of honey from the hive. One of the mid-sized supers was full of honey, and all the frames without brood on them are ours now. About 20 lbs. of honey I’d wager. We replaced the frames with some of the frames from the top super, and actually took the top super off. I’ll look to extract honey this week.

We set the honey frames in a food safe bin, and set the bin off to the side while we checked hive No. 1.

The wife and I took the inner cover off of hive No. 1 and you could tell right away its single super was full of honey too. I removed the super and the middle deep sized box, setting them down on nearby hay bales. Upon returning to the hive the air was thick with honey bees. Quickly though there were more bees than I could handle.

The sound was deafening really. I could feel their bodies bouncing off my bee suit. Taking two steps back I could tell there was a problem. Checking hive No. 3 there were a lot of bees, thick in the air for example but this was different.

I turned around and took a few more steps and knew I was in trouble. I briskly walked a dozen yards towards the garden but that made no difference. That’s when I felt the first sting through my bee suit.

“I gotta go!” I yelled out to my wife.

Usually I’m the one who gets bothered by the bees, so quite honestly I thought this was just another little episode.

Soon my calculated walk away from the hive turned into a quicker jog; intermittent running. I could feel bees all over me. Two maybe three stings through my jeans. Like getting hit with a hot pin point for a split second.

My bee suit just covers my torso and arms, long thick leather gloves cover up to my elbows. Regular jeans, shoes and sock round out my defenses. My wife’s suit is a whole body suit.

I reached the driveway covered in bees. The sound of buzzing was as loud as when I was near the hive seemingly. I turned back briefly wondering about my wife. Fortunately she had started towards the drive as well. Unfortunately at that point my defenses all failed. The bees had found the opening of my pant legs and I could feel them inside of my jeans. Inexplicably one was inside my suit, crawling on my neck.

As I got stung quickly in succession by several bees I went from trying to brush them off to actively killing them. Still the air was thick around me with them. And every crevice of my clothing had bees in various states of stinging and dying. Many having stung nothing but folds of my bee suit, jeans or gloves. They wouldn’t get off of me. I would rake one gloved hand over my arm with little effect. Next thing I know my sleeve is pushed up and there’s exposed skin on my arm, covered in a half-dozen bees.

I spun around not knowing what to do. I could feel them in the pockets of my jeans even. My wife came at me, two smoking smudge pellets in her hands, trying to smoke away the bees from me. I frantically swatted at my arms and legs, trying to kill every bee I could see. Twenty more yards down the driveway I sprinted. Only a handful of bees remained. In my mind I had bee stung countless times. I stepped on the bees in the gravel.

At some point my only option was to take all of my clothes off and chance it with the few remaining bees. There were too many INSIDE my suit and only one way to get away from them. I peeled off my bee suit and stepped on it repeatedly with my shoe. I kicked off my shoes and they flew inside of my shoes. I dropped my jeans, bees examining my pockets for loose change.

We spent another five minutes finishing off the remaining bees, knocking them down and stepping on them. The last bee I thought was in my hair, I could hear it like it was in my brain actually. Me begging my wife to find it and kill it. Turns out it was under my chin, and flew off as I stood up.

Eventually we made it inside my studio. Me standing in my underwear, red welts swelling on my arms. My wife took her boots off and three bees flew out. With the help of a ladder and fly swatter I made quick work of them as they buzzed about the north studio window.

After catching our breath, I took the time to put on tougher canvas pants, a sweatshirt and double socks. We had to go back out and re-assemble hive No. 1.

The wife lead the way with her smoker in hand. The bees had settled down a bit. I quickly lifted the middle deep into place, and then the upper mid-size box on top of it, not caring too much if I crushed any honey bees. We did add one completely new, empty mid-sized box to the top of the hive. We then replaced the inner and outer covers to the hive, and returned all of our frames, honey and tools to the driveway area. Technically we could have pulled probably six to ten frames of honey from hive No. 1 if it wasn’t for our bee attack escapade.

Back inside the house we counted about 9-10 definite stings on me, mostly my arms. The wife had a few stings on her legs. Her full suit afforded her better protection. And I think the bees keyed in on my as their primary target, feeding off of their attack and my eventual fear.

Once they got going, there was no stopping them.

I believe my clothing, despite only being a half suit and jeans, minimized the effectiveness of their stings, with many of the stings not fully registering. I easily felt a dozen stings on my legs, but there’s only one really visible. Same goes for my arms. Of the eight or so I can see, there were probably twice as many that I felt during the attack.

The fault is all ours, or mine. Our laziness, cockiness and / or stupidity is why it happened. First off it was a rainy overcast day, so the entire hive was basically at home – probably well over 40,000 bees when we opened it up. Secondly, with us being so busy, we hadn’t had a chance to add another box or clear out the upper mid-size box, so the bees were probably pissed that their hive was so full – no room. Lastly we didn’t smoke them at all. We’ve gotten in the habit of not smoking the bees when we check them because old hive No. 1 was so docile. And even No. 3 was pretty docile. Last year’s No. 2 hive package, and this new No. 1 hive package are extremely aggressive. We need to smoke them, and we need to wait for a sunny day when most of the bees are out foraging.

Long term our problem is just going to be our schedule. We may be too busy for bees. At the very least once these colonies die out, we may not be in such a rush to replace them. Bee keeping is an incredible hobby, but it does require time and consistent checking of the hives. Maybe our lifestyle or life requirements aren’t congruent with those needs. We’ll see. We also talk about making our sphere smaller so to speak. We’ve got too many irons in too many fires, and it’s starting to show.

It was a pretty freaky, scary experience today.

Lesson learned.

(P.S. speaking of making my sphere smaller, you’ll notice I don’t write as much anymore. There are two reasons, one is there’s not much going on. I’m either working or looking for work.  And two by time ten o’clock rolls around I just don’t feel like writing. It’s not like the old days where writing and art were fun creative releases in the evenings. I need to figure out what’s going to stay in my sphere of things that are important to me and my happiness, and what is going to have to go by the wayside. Hopefully writing will manifest itself either in this blog or some other way, but I just have to wait and see and figure it out. Something has to give because I’m basically burnt out mentally. Need to focus on what’s important and adjust my sphere accordingly. Thanks again to everyone who reads my miscellaneous ramblings. Hopefully there will be many more to come. I think my goal is to force myself to write 2 days a week, like Tuesday and Thursday. We’ll see.

-Chris)

Autumn Scenes & Honey Bottle Label

Autumn is in full swing.

Today we labeled our honey bottles. The labels look okay. There are some design changes I’ll make but those can wait until the next batch. We needed to get them labeled for tomorrow’s community yard sale.

Here are a few photos, including one of a frog that jumped out in front of the Rabbit the other day. It’s a northern green frog (Rana clamitans melanomawhich is can be found throughout Ohio. It’s fun discovering a “new to us” species on our land. Especially this large of an amphibian. One of these days I should do a book on all the animals we have on our land.

So many ideas, so little time.

Early Fall Bee Check

Days are getting shorter, and cooler as autumn creeps into Northeast Ohio. We checked the bees for the first time since there was a swarm a week or two ago. Methodically we examined all three hives, top to bottom. I don’t know if we found anything surprising, other than we can’t tell which hive swarmed, or if the swarm was even ours. All three hives seemed relatively healthy and strong. Though the next four weeks will be telling, as late fall and eventually winter approaches.

Hive No. 3: we saw eggs, though no queen. Their honey production is lacking as their medium super is empty. Like all three hives, the bottom deep box is fairly empty as well, devoid of much honey or brood I believe.

Hive No. 2: we saw no queen, and not necessarily any eggs either. Though towards the end of summer egg production goes down in preparation for winter. The hive was strong and well populated. It’s hard to believe that this would have been the hive that swarmed. Honey in hive No. 2 is in good supply and no apparent pests.

Hive No. 1: the largest hive has larvae and a queen. And likely close to 50K+ bees in it. We thought this would have been the swarm hive but there is a queen so it is not. This hive is beleaguered by pests though, including yellow jackets, hive beetles and mites. We treated the hive for mites and beetles, and squished as many yellow jackets as we could. The hive has at least 30 lbs. of honey in the lower medium super. We’ll have to see if we can harvest any or if we’ll just leave it for the bees for winter.

My suspicion is that we won’t harvest anything from hive No. 1 this fall. Hives No. 2 & No. 3 are off-limits ’til spring.

Elsewhere a deer decided to rut on one of the few trees I didn’t wrap, so of course I had to go out and wrap the trunk of a blaze red tupelo tree in the front yard.

Here are today’s photos:

First Time Honey Extraction

We’re very excited to have our first honey harvest! Yesterday I extracted ten (10) medium-sized frames of honey and this morning we bottled it.

Having never done it before I was needed to know what to do. As with most “grass-roots” hobbies information and communication are not strong suits of the bee industry. I sat down and read the “instructions” that came with our extractor and uncapping knife – suffice to say they were horrible. Decent information but haphazardly presents and NO illustrations or photos. So I looked at the bee keeping for dummies book and it just glosses over extraction, once again with no photos.

I guess they just figure we’re supposed to be born with the knowledge of how to extract honey.

So I went online to YouTube to search for videos on uncapping and extracting. I was met with a decent amount of success but frankly none of them were overly great. Huge opportunity to improve the process and education of the process in my opinion.

Taking a step back here is what extraction is all about in a nutshell:

  1. bees make wax cells on a frame, fill them with honey and cap them off, all in a very organized manner.
  2. we pull the wooden frames, filled with capped honey and put them in a food safe “air tight” bin.
  3. we set up all our equipment – uncapping tank, knife, extractor, and honey bucket.
  4. take a frame and run a knife along all the cells, removing the layer of wax that caps each cell, like filleting the skin off of a fish, drop all the wax cap pings into the uncapping tank for later.
  5. place frames in extractor (standing up length wise, bottom of frame in direction of travel), close the top and spin for about 4 minutes.
  6. flip the frames over so the other side faces out, and spin again, all the honey hits the walls of the extractor and flows to the bottom.
  7. place a 5 gallon food safe bucket under the extractor gate, with a fine mesh filter insert on top of the bucket.
  8. open the gate at the bottom of the extractor and watch the honey flow.
  9. repeat for all the frames of honey you have.
  10. wait a night then pour the honey from the bucket into jars, voila! fin.

Everything we did was done at room temperature in my studio. We washed everything ahead of time. In theory you should warm the frames up to 90 degrees for two days, but that sounds like a lot of work to me.

This is my set up for extracting honey, in my art studio.

This is my set up for extracting honey, in my art studio.

Uncapping

I started out by uncapping a frame. We got a free electric hot uncapping knife and a regular one. Without going into morbid details, the electric one is used because everyone needs everything to be electric; there is a chance it can burn your honey. And it’s a bitch to clean afterwards. The “cold” knife is just a serrated flat blade. Supposedly  you warm it up with hot water and cut caps off.

Well I tried the cold knife first and it worked like garbage. I did not warm it up, instead relying on its serrated edge. I massacred the first frame but did get the cap off. After that I didn’t even want to try the hot knife, mostly because I didn’t want to clean it. But another reason is because I think these knives were designed to work in a perfect world, but that’s not the case. Look at this illustration I made:

Uncapping the honey frames is easier said than done. The uncapping knives made by the bee industry leave much to be desired.

Uncapping the honey frames is easier said than done. The uncapping knives made by the bee industry leave much to be desired.

The bees make honey comb in a not always perfect manner. The knives are designed to slide along at a certain height, even relying on the wood frame to act as a guide. If the honey comb ungulates below the wood frame line or is in any way not a flat plane then the standard uncapping knives are useless in my opinion.

After massacring two frames I said “screw this”, went to the kitchen and got a serrated meat cutting knife. A fishing knife would have worked well too if it’s serrated. And like a charm I went about carving off all of the caps without any problem. I found it elegant and meditative compared to the brutality of the regular capping knife.

Uncapping honey using an uncapping knife. I don't think these knives are the best tool for the job; the overall design of everything leaves much to be desired.

Uncapping honey using an uncapping knife. I don’t think these knives are the best tool for the job; the overall design of everything leaves much to be desired.

This is an uncapped frame after using the standard uncapping knife.

This is an uncapped frame after using the standard uncapping knife.

Between you and me, I think that half of the crap invented for endeavors such as bee keeping are created by people who are really good at raising bees, but are, at best, marginal inventors and designers. Not to be a pompous designer (I am though), but I see it all the time. You could fall out of bed and improve upon the status quo. (It’s just frustrating because it could be easier to learn and do this but the effort is mixed at best)

I think part of the goal with any uncapping is to leave nice cells on the frame so the bee have less work to do when you reuse the frames with the wax comb already in place. Well, if it were up to me, I’d rip ALL the wax off, make candles and let the bees start from scratch.

I don’t know why we have to coddle our bees when it comes to honeycomb. And the stock knives did such an awful job uncapping that I probably should have ripped the comb off.

Extracting

After two frames are uncapped I placed them in the extractor. Once again, NO ONE will show you how to place the frames in. The extractor is a wire basket with no discernible way that you put the frames in. Apparently you just set them in there. My anal retentive self would have designed it to be more intuitive, or at least provided illustrative instructions, but once again: the bee industry is more adept at raising bees than communicating method.

Before I extracted though, I placed a food safe 5 gallon bucket below the spigot (gate) in the extractor. The bucket came with a fine mesh filter that you place on top of the bucket. The honey will have a bunch of wax and bee parts when it comes out of the extractor so that needs to be filtered out.

Also I placed 50 lb sand bags on the legs of the extractor. If you spin a couple of frames that are different weight then the whole extractor will dance across the floor.

The extractor works by using centrifugal force. The honey flies out of the cells as they spin around, it hits the walls and slides down to the bottom.

The extractor works by using centrifugal force. The honey flies out of the cells as they spin around, it hits the walls and slides down to the bottom.

I had to guess how to place the frames in the extractor. Regardless the bottom of the frame is the leading edge. Once one side is extracted, flip them over and do the other side. I spun them for about 4 mins. each time.

I had to guess how to place the frames in the extractor. Regardless the bottom of the frame is the leading edge. Once one side is extracted, flip them over and do the other side. I spun them for about 4 mins. each time.

I guessed I was doing it right; had two medium-sized frames (all our extractor can hold) inside the wire basket. I do know that the bottom of the frame should be in the direction of travel (honeycomb is actually built at a slight angle), and I knew that I’m supposed to rotate the handle clockwise).

I started spinning frames.

I have no idea how long you’re supposed to spin for so I spun the thing for 2-4 minutes per side. I’d pull the frames out and they were lighter and I didn’t see any honey inside the cells.

Good enough for me.

An extracted honey frame.

An extracted honey frame.

Close up of an extracted frame. You can see several cells that didn't get uncapped and they still contain honey.

Close up of an extracted frame. You can see several cells that didn’t get uncapped and they still contain honey.

The honey flows as you spin, from the extractor to the bucket. It’s pretty cool.

Honey flows from the extractor as we extract, into a 5 gal food safe bucket with a fine screen filter on top.

Honey flows from the extractor as we extract, into a 5 gal food safe bucket with a fine screen filter on top.

This is the honey resting on top of the filter. The honey flows through and all the wax and bee parts stay up top.

This is the honey resting on top of the filter. The honey flows through and all the wax and bee parts stay up top.

 

 

We extracted ten frames.

We extracted ten frames.

Note, the stupid extractor legs are too short and not adjustable so I had to jack them up to get all the honey out. Regardless, use a spatula to get the last bits of honey out of the extractor the next morning.

The makers of the extractor didn't make the legs long enough so I have to prop them up to get the last of the honey out.

The makers of the extractor didn’t make the legs long enough so I have to prop them up to get the last of the honey out.

I placed the spent frames on a handy-dandy stand that came with the uncapping tank. Of course the stand is too narrow by about a hair so I had to wiggle the frames in place to make them fit – another bad design. Plus it would be nice if the stand (a big piece of plated metal) would also act as a uncapping tank lid. But hey, that would be too logical.

All the wax and honey from uncapping sits upon a perf screen in the uncapping tank. We’ll let that sit for a few days and then bottle the honey from there too, after running it through the mesh screen and bucket.

We yielded 20 8oz. bottles and 22 4oz. bottles of honey (or vice versa). I don’t know how many “pounds” that is other than saying 16 fluid oz. = a “pound” so 15-1/2 pounds. I don’t think that’s right. Regardless we have a boat load of jars.

This is our set up for jarring the honey. It's best with two people. One filling jars and the other capping and resupplying jars. Takes about 20 mins to fill 40 bottles.

This is our set up for jarring the honey. It’s best with two people. One filling jars and the other capping and resupplying jars. Takes about 20 mins to fill 40 bottles.

Filling our first ever jar of honey.

Filling our first ever jar of honey.

It's best to have two people when extracting and filling jars.

It’s best to have two people when extracting and filling jars.

22 8oz. jars and 20 4oz. jars is our harvest so far. We still have to pour what we get from the capping tank and what's left in the bucket.

22 8oz. jars and 20 4oz. jars is our harvest so far. We still have to pour what we get from the capping tank and what’s left in the bucket.

Clean Up

Everyone flips out about how messy the process is. If you ask me it’s not a big deal. I worked methodically and was able to keep spills and drips to a minimum. I had four damp rags on hand and I have a sink in my studio perfect for washing sticky hands.

I placed the frame bin and extractor on their sides, out back by the bee hives. The bees will gladly clean those up, then I will wash them. The extracted frames go on top of the hive and the bees will clean them up as well. I’m still on the fence – I may pull more wax honey comb from those frames to start making wax blocks for home use or resale.

I simply set the extractor out in the yard for the bees to clean up. Then I'll hose it off and wash it.

I simply set the extractor out in the yard for the bees to clean up. Then I’ll hose it off and wash it.

We placed a medium box filled with the extracted frames so the bees can clean them up in hive No. 1.

We placed a medium box filled with the extracted frames so the bees can clean them up in hive No. 1.

My Take-Aways:

  1. It’s not that messy of a process if you take your time.
  2. Uncapping knives / frames are poorly designed for the uncapping process.
  3. You can just use a serrated kitchen knife to uncap.
  4. Extractors should be taller than a 5 gallon bucket and have adjustable legs.
  5. You need to ballast or bolt down your extractor.
  6. Instructions for the honey harvest process are dismal.
  7. The harvesting process can be very relaxing and meditative

So there you have it. It’s awesome to finally have honey from our hives (actually hive No. 1). And we got a lot. I’m not sure what we’ll do with it all, but we’ll definitely need to sell it one way or another, just because we don’t need that much honey. I’m going to make labels even.

Beekeeping is an amazing and wonderful endeavor. I highly recommend it to anyone who is interested. It’s easier than you think, though it’s not easy per se.

Now we can’t wait to harvest more!

Ask any questions in the comments below.

A jar of our wildflower honey.

A jar of our wildflower honey.

The obligatory Daisy photo.

The obligatory Daisy photo.